What is Ford All in One?
Ford All in One is a program that allow you to access the Ford IMMO dump to edit the dump file.You can use Ford All in One to get the your Ford car immo data,and according to the immo data,you are allowed to add keys…
Ford All in One Installation Operation System Requirement:
OS: Windows XP/7/8/70
Minimum Specifications:
Processor : Intel Core 2 Duo 1.8Ghz or ADM Athlon X2 2.4 Ghz
RAM :2 GB
HDD : 160GB
Ford All in One Support Car List:
Ford Transit Connect 2005-2010, Ford Fiesta 2006-2009, Ford Fusion 2006-2009 , Ford Mondeo 2008+, Ford Galaxy 2008+,
Ford S-max 2008+
Ford All in One Support Supported ECU :
SID804, EDC16, SID206, SID202, SID803, SIM210,
How to Use Ford All in One Software?
If car transponder key is lost:
1Remove GEM (Intelligent power distribution module) from car.
2Open and locate 25320 EEPROM. Read (with CarProg you can read in-circuit).
3Save file and open with “Open GEM EEPROM”. Program will show you transponder data.
4Write this data to EH2 or TPX2 transponder with any transponder programmer (like RW4, Codereader or Zedbull)
If motor ECU is defective/lost:
1Remove GEM (Intelligent power distribution module) from the car.
2Open and locate 25320 EEPROM. Read (with CarProg you can read in-circuit).
3Save file and open with “Open GEM EEPROM”.
4Open ECU and read EEPROM.
5Open file with “Open ECU EEPROM” button.
6Now transfer synchronization data from GEM to motor ECU using button Synchro to ecu.
7Save ECU file and write it back to Engine Control Module
How immobiliser works on Ford Transit Connect 2005-2010,Ford Fiesta 2006-2009,Ford Fusion 2006-2009 :
Immobiliser data (PATS) on these cars are stored in the instrument cluster(IC) HC12 processor.
Instrument cluster receive transponder key signal from immobiliser coil and if key data is equal to car, IC send synchronisation signal to motor ECU.If transponder key is stored in IC and synchronization data IC-ECU is correct, ECU permit to start the engine.
How does immobilizer work on Ford Mondeo 2008+, Galaxy 2008+, S-max 2008+:
Immobilizer data (PATS) on these cars are stored in the Intelligent power distribution module (GEM) located in passenger compartment fuse box. GEM receive transponder key signal from immobilizer coil and if the key data is equal to car, GEM sends synchronization signal to motor ECU.If transponder key is stored in GEM and synchronization data GEM-ECU is correct, GEM permits to start the engine.
Ford All in One Original v4.3 Free Download:
Note:For this original version,you need buy license from official website,it will cost you about €50.00,and one license is for one computer only.
Ford All in One Patch v3.2
* Comment obtenir le lien de téléchargement ?
* How do I get the download link?
viewtopic.php?f=222&t=9976* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
viewtopic.php?f=77&t=296
