46 MB - Cloud Mega
Included versions:
BMW_BimmerCode and Mini v4.7.0-10436 (Premium)
BMW BimmerLink v2.26.0-5083
BMW BimmerTool Expert v3.3.25
BMW BimmerCode and Mini v4.7.0-10436 (Premium)
BimmerCode for BMW and MINI Apk info
BimmerCode allows you to code your BMW or Mini F and G series car to unlock hidden features and customize your car to your liking.
Activate the digital speed display in the instrument cluster or video while driving in the iDrive system. Do you want to deactivate the Start Stop function or the Active Sound Design? You will be able to code all of this and much more by yourself with the BimmerCode app.
SUPPORTED VEHICLES
– 1 Series F20, F21 (2011+)
– 2 Series F22, F23, F87 (2013+)
– 2 Series Active Tourer F45 (2014+)
– 2 Series Gran Tourer F46 (2015+)
– 3 Series F30, F31, F34, F35, F80 (2011+)
– 4 Series F32, F33, F36, F82, F83 (2013+)
– 5 Series F07, F10, F11, F18, G30, G31, G38, F90 (2010+)
– 6 Series F06, F12, F13, G32 (2011+)
– 7 Series F01, F02, F03, F04, G11, G12 (2008+)
– X1 F48 (2015+)
– X2 F39 (2018+)
– X3 F25, G01 (2010+)
– X4 F26, G02 (2018+)
– X5 F15, F85 (2013+)
– X6 F16, F86 (2014+)
– i3 (2013+)
– i8 (2013+)
– Mini F54, F55, F56, F57 (2014+)
BMW BimmerLink v2.26.0-5083
BimmerLink for BMW and MINI Apk info
BimmerLink for Android is the direct link to your BMW or Mini. Using an OBD adapter you can read trouble codes or display sensor values in realtime, check the current state of the DPF in your car or register a new battery after replacement. BimmerLink even allows you to remotely control the exhaust flap or mute the Active Sound Design in your car.
READ AND CLEAR TROUBLE CODES
Diagnose your car as would otherwise be possible only by your Service Partner. In contrast to generic OBD apps, BimmerLink allows you to read trouble codes from all control units in your car. Existing trouble codes can be cleared easily and besides the error memory you can also read errors from the info memory and the permanent error memory.
DISPLAY REALTIME SENSOR VALUES
BimmerLink provides a huge selection of values like oil temperature or boost pressure. Keep an eye on all the important parameters of your car with a personalized dashboard.
EXHAUST FLAP REMOTE CONTROL*
Take control over the exhaust flap in your car and decide yourself, whether it should be closed or open.
ACTIVE SOUND DESIGN**
If you do not like the artificial engine sound generated in your car, just mute the Active Sound Design with BimmerLink.
DPF REGENERATION***
BimmerLink allows you to check the current state of the diesel particulate filter in your car. Find out when the last regeneration took place or how much ash has accumulated in the filter and start a regeneration with the touch of a button.
BATTERY REGISTRATION
If you want to replace the battery in your car, this has to be registered in the engine control unit and BimmerLink allows you to do this yourself now.
PARKING BRAKE SERVICE MODE
BimmerLink allows you to activate the service mode for the electromechanical parking brake.
REQUIRED ACCESSORIES
To use the app one of the supported Bluetooth or WiFi OBD adapters is required. For more information please visit https://bimmerlink.app.
SUPPORTED CARS
1 Series (2008+)
2 Series, M2 (2013+)
2 Series Active Tourer (2014+)
2 Series Gran Tourer (2015+)
3 Series, M3 (2008+)
4 Series, M4 (2013+)
5 Series, M5 (2008+)
6 Series, M6 (2008+)
7 Series (2008+)
8 Series (2018+)
X1 (2009+)
X2 (2018+)
X3 (2010+)
X4 (2018+)
X5, X5 M (2008+)
X6, X6 M (2008+)
X7 (2019+)
Z4 (2009+)
i3 (2013+)
i8 (2013+)
Mini (2008+)
* Only for cars that are equipped with an exhaust flap by factory.
** Only for cars that are equipped with the Active Sound Design by factory.
*** Only for cars with diesel engine.
BMW BimmerTool Expert v3.3.25
Bimmer-Tool (BTool) Apk info
Try free Btool Lite first. It lets you check if the app is compatible with your BMW and your OBD adapter.
Important: This application requires a reliable OBD adapter like Carista (see https://caristaapp.com/adapter). Cheap adapters may not work or functionality may be limited.
Application allows to read / erase fault codes and view live data in BMW 1/3/5 E/F series and similar models.
It provides all the functionalities as Lite version and additionally allows to:
– read DPF regeneration status and detailed information
– request DPF regeneration
– reset DPF adaptation values (required after filter replacement)
– read exhaust fumes pressure
– read injectors adjustments
– read actual and expected values for air mass, intake manifold pressure, fuel pressure
– log data to CSV file for further analysis
– register battery replacement (without changing battery properties)
– reset lamps circuits blocked due to short-circuit error
– reset oil service or change interval (for cars below mid 2007 K+D-Can cable required)
Supported OBD adapters
– K+D-Can USB: This is recommended and most reliable adapter. You will also need USB-OTG cable.
– ELM327 Bluetooth: Bluetooth connection may be slower than USB. Only genuine ELM327 or PIC18-based adapters will work. It may not work with older engines. More info below.
– ELM327 WiFi: Like ELM Bluetooth connection may be less stable. On some devices mobile data transmission needs to be disabled to use WiFi adapter.
Recommended Bluetooth adapters:
– Carista: see https://caristaapp.com/adapter
Application works also with BMW E60, E83*, E81, E87, F10, F30, F25 and with M47N/M57N (DDE5) engines in E46/E39 models.
Older engines like M47 DDE3, M57 DDE4 or M54 MS43 also works but only with K+DCan cable.
If you have questions or need any help send me an email. You can find my address on the bottom of the page.
*Quick start
1) Connect adapter to OBD II socket
2) Turn ignition on
3) Connect adapter to your phone:
* USB: Connect adapter to the phone using USB-OTG cable. Phone will ask which app to start – choose Btool.
* Bluetooth: Go to phone Bluetooth setting. Search for Bluetooth devices and pair the adapter with the phone (PIN is usually 0000 or 1234).
* Wifi: Turn mobile data transmission off. Turn WiFi on and search for available WiFi networks. Connect the phone to the adapter’s WiFi.
4) Start the app, go to ‘Car’ and choose model and year.
5) Go to ‘Connection’ and choose connection type, adapter type and communication protocol.
6) Tap ‘Connect’ button.
*Limitations:
– Rain sensor reset requires K+DCan cable for cars up to 2007. It will not work with ELM adapter.
– X3 E83 with M47/57 and ELM adapter supports engine only. For other modules use K+DCan cable.
– X5 E83 may not work with Bluetooth adapter. USB K+DCan cable may be required.
*Common problems
– Engine ‘No response’ error in cars up to 2007 and BT/Wifi adapter. If this error occurs from time to time, try selecting ATWM option under advanced connection settings.
– No connection: If adapter & protocol settings are correct and app still cannot connect to the car try force stop all diagnostic applications in application manager (including btool) and try to connect again.
Why this app requires permissions?
– Storage: required for USB adapters support
– Photos / Media / Files: allows to create CSV files
– Pair with Bluetooth devices/access Bluetooth settings: required for Bluetooth adapters support
– Full network access: required for WiFi adapters support
– Approximate location: Theoretically it is possible to find approximate location using Bluetooth, however this app does not read/use location.
* Comment obtenir le lien de téléchargement ?
* How do I get the download link?
viewtopic.php?f=222&t=9976* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
viewtopic.php?f=77&t=296
