VW Simos18 Flash Tools
Règles du forum
Comment télécharger? How to download?
Cliquez ici / Click here viewtopic.php?f=77&t=1294
Comment télécharger? How to download?
Cliquez ici / Click here viewtopic.php?f=77&t=1294
- rgmaster3
- Capitaine de navire (Admin)
- Messages : 66223
- Enregistré le : ven. 29 sept. 2017 21:51
- Réputation : 56246
- Localisation : Îles Cocos
- A remercié : 4863 fois
- A été remercié : 43673 fois
- Sexe :
- Zodiaque :
- Contact :
VW Simos18 Flash Tools
Volkswagen Simos Flashing Tools
38 MB - Google drive
Unlock flashing via frf, unpack frf flash etc...
VW Flashing Tools over ISO-TP / UDS
* Currently supports full custom reflashing of the Continental/Siemens Simos18.1/6, and Simos18.10 control units as used in MQB VW AG vehicles, as well as the Temic DQ250-MQB, Bosch DQ381-MQB DSG, and Gen 5 Haldex4Motion control units over UDS.
* RSA-bypass/"unlock" patches are provided for Simos 18.1/6 (SC8 project identifier) and Simos18.10 (SCG project identifier).
* Additionally supports reflashing of several other Simos ECUs provided that RSA validation (if present) has already been disabled.
Supported Interface Hardware:
Macchina A0 with BridgeLEG firmware, via J2534
Tactrix OpenPort 2.0 J2534. Other J2534 devices are supported, but only if they support the STMIN_TX IOCTL. Clones and counterfeits have mixed results. Supported on Windows, possible to make work on Linux/OSX.
SocketCAN on Linux, including MCP2517 Raspberry Pi Hats, slcan, and other interfaces.
How to use:
* Open VW_Flash_GUI.exe from releases folder that you downloaded
* Make sure your tactrix is connected
* Click "interface" at the top, and then "select interface"
* Choose the openport
* Then click the "Get ECU Info" button in the middle to make sure it connects.
* Once you've done that, click "open folder" on the right, and open the folder where the attached files here are.
* Click "Flash Stock" from the dropdown at the bottom
* And then select the .frf file
* This will flash the ECU with **STOCK** updated file.
* Make sure the car starts/runs when this is done. If you run into any issues with the stock file, you may need to bench flash a recovery.
If the stock file flashed fine:
From the drop down at the bottom, click "Unlock ECU (FRF)"
Click the H__0001.frf file
And flash it.
Then once that's done, click the drop down and select "Full Flash Unlocked"
Click the E__0005.frf file
And flash it.
* Comment obtenir le lien de téléchargement ?
* How do I get the download link?
viewtopic.php?f=77&t=1294
* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
viewtopic.php?f=77&t=296
Comment s'inscrire et prendre un abonnement?
How to register and take a subscription?
1.Comment s'inscrire sur le forum? / 1.How to register on the forum?
viewtopic.php?f=77&t=296
2.Comment prendre un compte premium? / 2.How To Take premium account?
viewtopic.php?f=77&t=1294
3.Comment rechercher sur le forum? / 3.How to search for the forum?
viewtopic.php?f=224&t=14788
4.Comment demander le lien de téléchargement et comment le recevoir par messagerie privée?
4.How to get the download link and how to receive it by private messaging?
viewtopic.php?f=222&t=9976
Nous contacter / Contact us
memberlist.php?mode=contactadmin
How to register and take a subscription?
1.Comment s'inscrire sur le forum? / 1.How to register on the forum?
viewtopic.php?f=77&t=296
2.Comment prendre un compte premium? / 2.How To Take premium account?
viewtopic.php?f=77&t=1294
3.Comment rechercher sur le forum? / 3.How to search for the forum?
viewtopic.php?f=224&t=14788
4.Comment demander le lien de téléchargement et comment le recevoir par messagerie privée?
4.How to get the download link and how to receive it by private messaging?
viewtopic.php?f=222&t=9976
Nous contacter / Contact us
memberlist.php?mode=contactadmin