![Image](https://www.motorcarsoft.com/tuto_img_youtube/h/01-96995.png)
![Image](https://www.motorcarsoft.com/tuto_img_youtube/h/02-96995.png)
0. Make sure you have 0.Prerequirements windows updates installed.
1. Install Program (you will find it in 1.ODIS-E_9.2.2+PS_154.0.130 after extraction
at \ODIS_Engineering\Trade-Retail\software\installation\)
1a.if u get an error almost at the end let it finish,
go and uninstall Visual C++ 2005 that you have in your system and run setup again.
2. Replace files with the ones from patch(2.ODIS-E_9.2.2_DE-RO-GB-SI_Patch.7z)
3. Add VehicleMapping to proper location(optional)
4. Extract 3.Projects .... in C:\ODIS-DIAG-MODULES-ENGIN (or your chosen folder at program install)
5. Start ODIS-E and install Postsetup.
6. At the end you will see program installed and all there but if you have a clone then close the program
and install 5.CloneAPI.exe
Total size 3.38 GB
Enjoy a clean and fast install of Odis Engineering with Service(5.1.6) and Engineering projects included.
30.07.2019 - Add-on for current postsetup to upgrade it at level 154.0.135 (2019.07.26)
Extract this on top of 1.ODIS-E_9.2.2+PS_154.0.130, if is something to overwrite do it and so you get updated Postsetup 154.0.0.135. After you put the files in PS do update from program and you get updated OE at 26.07.2019.
18.08.2019 - Add-on for current postsetup to upgrade it at level 154.0.136 (02.08.2019)
24.08.2019 - Add-on for current postsetup to upgrade it at level 154.0.137 (15.08.2019)
IMPORTANT!!!
24.08.2019 - Remade complete install package with OE 9.2.2 PS 154.0.137, Projects only for OE from 04.08.2019 and with new instructions on how to install.
-In case it is your first time download then take this package and forget the rest.
-In case you are a returning user take latest add-on and if you want from here latest projects and VehicleMapping.
Odis Engineering 9.2.2 with Postsetup 154.0.130(2019.07.03)
0. Make sure you have 0.Prerequirements windows updates installed.
1. Install Program (you will find it in 1.ODIS-E_9.2.2+PS_154.0.130 after extraction
at \ODIS_Engineering\Trade-Retail\software\installation\)
1a.if u get an error almost at the end let it finish,
go and uninstall Visual C++ 2005 that you have in system and run setup again.
2. Replace files with the ones from patch(2.ODIS-E_9.2.2_DE-RO-GB-SI_Patch.7z)
3. Add VehicleMapping to proper location(optional)
4. Extract 3.Projects .... in C:\ODIS-DIAG-MODULES-ENGIN (or your chosen folder at program install)
5. Start ODIS-E and install Postsetup.
6. At the end you will see program installed and all there but if you have a clone then close the program
and install 5.CloneAPI.exe
Add-on postsetup upgrade from 130 to 135
Extract this on top of OE 9.2.2 PS 154.0.0.130, if is something to overwrite do it and so you get updated Postsetup 154.0.0.135.
After you put the files in PS do update from program and you get updated OE at 26.07.2019.
Add-on postsetup upgrade from 135 to 136
Extract this on top of OE 9.2.2 PS 154.0.135, if is something to overwrite do it and so you get updated Postsetup 154.0.136.
After you put the files in PS do update from program and you get updated OE at 02.08.2019.
Add-on postsetup upgrade from 136 to 137
Extract this on top of OE 9.2.2 PS 154.0.136, if is something to overwrite do it and so you get updated Postsetup 154.0.137.
After you put the files in PS do update from program and you get updated OE at 15.08.2019.
warning: Use this add-on in case you have used all of them before, if not i advice you to take my full package updated.
* In case you want to update your projects also to 04.08.2019 then before you update to this postsetup update projects and vehicle
mapping from the updated full package.
* So to make your download smaller, take addon, 4.Projects_9.2.2_04.08.2019 and 3.VehicleMapping EN&DE 04.08.2019 from full updated package.
Full Install OE 9.2.2 with PS 154.0.137 and projects 04.08.2019
0. Make sure you have 0.Prerequirements windows updates installed.
1. Install Program (you will find it in 1.ODIS-E_9.2.2+PS_154.0.137.7z after extraction
at \ODIS_Engineering\Trade-Retail\software\installation\OffboardDiagSetup-Engineering_9_2_2-B92_2_5_8.exe)
1a.if u get an error almost at the end let it finish,
go and uninstall Visual C++ 2005 that you have in system and run setup again.
2. Replace files with the ones from patch(2.ODIS-E_9.2.2_DE-RO-GB-SI_Patch.7z)
3. Add VehicleMapping to proper location(optional)
4. Start ODIS-E and install Postsetup (click Browse and point to folder where you extracted 1.ODIS-E_9.2.2+PS_154.0.137.7z)
5. After Postsetup has finished you need to install projects.
a) Open OE, click Admin(right side up) and go to General -> Diagnostic Data
b) In each field ODX update... click Select at the end of row and point to Projects folder to each brand ODXUpdate.xml
c) Since you have 9 brands, here you have just 6 fields, so you will update 1 time 6 brands then come back for other 3.
d) After you Selected all ODX.... go to right side menu and click Configuration-ODX Update
6. At the end you will see program installed and all there but if you have a clone then close the program
and install 5.CloneAPI.exe
Total size: 6.92 GB
Enjoy a clean and fast install of Odis Engineering.
![402 :402:](./images/smilies/pirat08.gif)
* Comment obtenir le lien de téléchargement ?
* How do I get the download link?
![Image](https://www.motorcarsoft.com/tuto_img_youtube/c/frecciag.gif)
* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
![Image](https://www.motorcarsoft.com/tuto_img_youtube/c/frecciag.gif)