CANCLIP interface fix and repair - Réparation d'interface CAN CLIP
Comment télécharger? How to download?
Cliquez ici / Click here viewtopic.php?f=77&t=1294
- rgmaster3
- Capitaine de navire (Admin)
- Messages : 64706
- Enregistré le : ven. 29 sept. 2017 21:51
- Réputation : 54800
- Localisation : Îles Cocos
- A remercié : 4788 fois
- A été remercié : 42644 fois
- Sexe :
- Zodiaque :
- Contact :
CANCLIP interface fix and repair - Réparation d'interface CAN CLIP
and another on the multiplex network with unrecognized calculators !
So I set out to change and replace the components that had undergone attempted repair with Printed circuit tracks torn
Components were:
SJA1000T, PCA82C251 , CYPRESS AN2135SC and his quartz and two quartz 32.768kHz !
Here is the result after a good cleaning:
Several tracks on PCB are gone noticed; Chinese , we do not sit too glue that they used ? ?
So implementation of new components plus change the relay on the CAN card :
CAN electronic board :
Then reassembling the whole, connection on USB port + 12Vdc:
All LEDs light up , that's a good sign.
Installing drivers and outstanding :
Then start the clip version V136 with RSWIN software activation :
update firmware of RLT2002 probe :
then attempt to read the VIN "empty" ( ie without vehicle)
The test is quite conclusive, but let's get serious with tests on a Laguna2 ph2 (with diferent PC and V126 clip ... version ) :
Identification VIN automatic , no worries ; I get the manual box and a range of 0 and is part of a network scan and end scan ....
Message: check the integrity of the multiplexed detection and network computers 3 of 9 !
There is therefore still a big concern on this interface , but where ? ? ? ? ? ?
If we look with another probe ( always Chinese ) but it works : Here what you get on a scan of the network architecture :
On a small pattern found after on ethernet concerning the pin assignment of the OBD socket (on a megane 2) , there is high chance that the missing computers
be associated with the terminal 7 of the decision ; ie the line out ISO 9141-2 K
Let's start by looking at therefore continuity of all pinoches connector obd onto the card with the input interface connector. Here it is:
At first sight nothing special, but when you take a multimeter and test continuity; we see this video:
https://youtu.be/bURsIXx6_6E
Incredible , no conduction immediately behind the pin round input and sounds canclip point nearest test connector ....
So I redo the weld and the other in passing.
I back all this and steering the car ; I raise the software and now i communicate with all calculators .
Still problems welding, this is crazy
How to register and take a subscription?
1.Comment s'inscrire sur le forum? / 1.How to register on the forum?
viewtopic.php?f=77&t=296
2.Comment prendre un compte premium? / 2.How To Take premium account?
viewtopic.php?f=77&t=1294
3.Comment rechercher sur le forum? / 3.How to search for the forum?
viewtopic.php?f=224&t=14788
4.Comment demander le lien de téléchargement et comment le recevoir par messagerie privée?
4.How to get the download link and how to receive it by private messaging?
viewtopic.php?f=222&t=9976
Compte d'abonnement
Subscription account
* Si votre compte donateur n'est pas activé! Contactez-nous par le formulaire de contact ci-dessous
* If your donor account is not activated! Contact us by the contact form below
Nous contacter / Contact us
memberlist.php?mode=contactadmin
Réglementation du téléchargement
Download rules
viewtopic.php?f=222&t=9976
* Remerciez l'auteur et notez positivement pour chaque application s'il vous plait.
* Deux téléchargements autorisés par jour.
* 15 téléchargements maximum, y compris trois packs (logiciels ou documents PDF).
* Thank the author and note positively for each application please..
* Two downloads authorized per day.
* 15 Downloads maximum, including three packs (software or PDF documents).
255 derniers membres ayant consulté ce sujet
Tonton 10, scorpioman, kike, xboxcristal, truvali17, corvocioe, ilker, Ghanobestal, stefolio, AutoProDiag, kadavra01, kantas2478, Thierry1955, 19maury86, najiih, tomdu7601, Alounaha, sebbah, 123Robby, amineyuki, DIAGNO07, vieuxchoub, MIKA38, Doumé01, Psem, Eric60370, lihaven77, bricoleur14, svfsdf, Tsétsé, ursule, titeuff971, hamzaauto, prutserjo, manu54360, chamo, psytricky, SAMI4343, Listek, Jo_R, Dorf, fef, tontotarik, vento19833, alex02510, fAaycal, Rickman_PT, beckham42500, guigui3830, mak2, Bablou, opsys, lekingabs, miguelsalta, nounouch18, benchaabane mohamed, rgmaster3