Tested on a Fiat Bravo (made in 2010) with Blue&Me System.
Well i share here, with anyone the NavteQ Maps up to date (2016-2017) , the KeyGen and the tutorial, this maps works for (Alfa,Lancia,Fiat and Chrysler)all brands mentioned before at normally works fine.
Here we go.
1º Download the NavteQ Maps and the KeyGen to get a valid Serial Number here.
2º Create a empty folder on C:/ or in D:/ ,Partition or anywhere you want, but the folder need to be empty. I usually create a folder like that (!Temp) to means that folder is temporarily and only to update the RadioNav.
3º When the download of NavteQ Map (2016-2017) are completed and the KeyGen also have finished to download. Please extract to the !Temp or (Your empty folder) the content of KeyGen.zip and extract the files on MAPS_for_InstantNav_RadioNav_SDCARD_2016-2017.zip extract just this files CCT.DAT & CCT.DAT.inf to the !Temp folder or to the empty folder you created and extracted the KeyGen.zip
4º Format the SD Card on FAT32 .
a)Put the all the content you have extracted from the KeyGen.zip and CCT.DAT & CCT.DAT.inf you have extracted from the MAPS_for_InstantNav_RadioNav_SDCARD_2016-2017.zip to your SD Card and go to your car.
b)Insert the SD Card into you car and turn on you engine (you also can turn on only the battery) when the RadioNav/InterNav turns on he show you something like that
(this image is different country by country depending the language system selected)
c)Remember it or take a photo or you can also write it on you smartphone or in a sticky note. (You need that numbers/Letters it's your license key) and come back to your computer/tablet.
5º Now please format again you SD Card in Fat32, yes you need to erase all files, so format everything.
6º Now put all files you have extracted from (MAPS_for_InstantNav_RadioNav_SDCARD_2016-2017.zip) if you don't have already extracted all files, extract all files from (MAPS_for_InstantNav_RadioNav_SDCARD_2016-2017.zip) and put in a new fold exemple (!Temp2) or (Your new empty folder).
a)Put all files in your clean and formated in fat32 SD Card.
7º Go to you car and insert the SD Card in your RadioNav (Start the engine or just turn on the battery) and after insert the Serial Key provided in your RadioNav (Step Number 4º in chapter "b") , (Usually is 16 Characters, Numbers and Letters)
Note: in some GPS the Activation prompt to insert the Serial Key is in (Menu->Settings>SD CARD Management -> Enter Activation Code)
Download section, see bottom of this page
KeyGen (Filename: KeyGen.zip Note: A tutorial is inside take a look)
NavteQ Maps 2016-2017 (Filename: MAPS_for_InstantNav_RadioNav_SDCARD_2016-2017.zip)
Fiat gps Maps europe 2016-2017 InstantNav RadioNav + Patch
