MMI VIM login generator
Google drive
1. Select control module 5F in VAG-COM/VCDS
2. Select “Advanced ID – 1A”
3. Decode the value from the “Serial number” field. If there is more than one serial number field, use the first one.
VIM Code Generator:
Enter the 5F Information Electric Serial number in the box below and click “Generate”.
VIM Code 1:
VIM Code 2:
Always start with VIM Code 1.
Write down your codes and with VCDS connected to your car follow the steps below.
4. Select “Security Access – 16”
5. Enter VIM code 1 from the VIM code generator.
6. Click “Do It!”. If you get a “code not valid” message try the alternate code. If the second code does not works it’s likely that your control module doesn’t support VIM adaptation.
7. Select “Adaptation – 10”
8. Select channel 48
9. Click read
10. Set the value to 255
11. Click test
12. Click save
13. Click “Done, Go Back”, close the controller and exit VCDS
14. Reset the MMI.
* Comment obtenir le lien de téléchargement ?
* How do I get the download link?
viewtopic.php?f=77&t=1294* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
viewtopic.php?f=77&t=296