Mercedes Garmin Pilot Star2 NTG5 V15 2021 - A2139064607
12 GB - Cloud Mega
Changing the cid on SD card / Changer le cid sur la carte SD
viewtopic.php?f=164&t=3897Here is how to change CID on SD:
1 - Card EVO/EVO+ (I tried 32G and 64G SD) older then summer 2016.
2 - Format card in Windows (by Guiformat.exe utility)
3 - Start Laptop from boot flash Ubuntu (previously created in PC by LiLi USB Creator)
4 - Copy file mmc and mmc32 to Desktop
5 - Right cick -> open terminal, then go to the Desktop folder ( by command "cd Desktop" )
6 - Make command execution rights by command "chmod 777 mmc32" and "chmod 777 mmc"
7 - Insert the SD in slot. Terminal command "df" and verify the name card.
Somewhere down everything must occur "mmcblk0" + p + a number.
The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0".
When you do not see anywhere mmcblk0,
you must try different Laptop with on matherboard integrated cardreader.
Now you can read the original CID by command "cat / sys / block / mmcblk0 / device / cid"
8 - change CID by terminal command:
"sudo ./mmc32 prog_cid / dev / mmcblk0 xxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
or
"sudo ./mmc prog_cid / dev / mmcblk0 xxxxxxxxxxxxxxxxxxxxxxxxxxxx"
xxxxxxxxxxxxxxxxxx=CID
Writing new CID: xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Success! Remove and Reinsert SD card to check new CID.
If you do not see messages about success, remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"
Now will be displaying the new CID xxxxxxxxxxxxxxxxxxxxxxxx
You should see xxxxxxxxxxxxxxxxxxxxxxx line.
The last two characters may be different, for example, be 69.
If CID changed besides the last two numbers, so it's okay.
On the last two numbers does not matter,
it's just a checksum, which generates SD card itself.
If the CID unchanged try again command for changing, remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"
If not change, try the same command, but with different bit version of mmc,
remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"
If not change, you must use a different EVO
* Comment débloquer le Quota dépassé sur MEGA ? (Télécharger en illimité sur mega)
* How to unlock the Quota exceeded on MEGA? (Unlimited download on mega)
viewtopic.php?f=136&t=11645
* Comment obtenir le lien de téléchargement ?
* How do I get the download link?
viewtopic.php?f=222&t=9976* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
viewtopic.php?f=77&t=296
