8.83 GB - Cloud Mega
Vehicle compatible:
Polo Cross (A05) 2010-2014
Golf Cabrio (A6) 2012-2016
Golf Plus (A6) 2009-2014
Cross Golf (A6) 2009-2014
Beetle NF (Lim.) 2012-2017
Beetle Cabrio NF 2013-2017
Jetta (A6) 2011-2015
Jetta Hybrid (A6) 2013-2015
Scirocco III 2008-2014
Eos GP 2011-2016
Touran (A6) 2011-2015
Cross Touran (A6) 2011-2015
Tiguan (GP) 2012-2017
Passat Lim. (B7) 2011-2015
Passat Var. (B7) 2011-2015
Passat Alltrack (B7) 2012-2015
Passat CC (B6) 2009-2012
CC (B6-GP) 2012-2018
Sharan (NF) 2011-2015
Amarok (Doppelkabine) 2010-2017
Amarok (Einzelkabine) 2010-2017
Caddy Cross Kasten (A5) 2014-2015
Caddy Cross Kombi (A5) 2014-2015
Caddy GP (A5) 2011-2015
Caddy GP Kasten (A5) 2011-2015
Caddy GP Kombi (A5) 2011-2015
Caddy GP Maxi (A5) 2011-2015
Caddy GP Maxi Kasten (A5) 2011-2015
Caddy GP Maxi Kombi (A5) 2011-2015
Multivan (T5-GP) 2010-2015
Caravelle (T5-GP) 2010-2015
California (T5-GP) 2010-2015
Transporter (T5-GP) 2010-2015
AND, A, B, CH, CZ, D, DK, E, F, FIN, FL, GB, GBZ, GR, H, I, IRL, L, MC, N, NL, P, PL, RSM, S, SK, SLO, V
Instructions:
Here is how to prepare SD for RNS315
1 - SD/microSDHC memory card samsung EVO/EVO+ 16/32/64Gb older then summer 2016. Format the SD card in FAT32 by Guiformat.exe utility (https://fat32-format.en.softonic.com/).
2 - Unpack by last WinRar and copy navpsf_update on card . Nothing more!
3 - Start Laptop from boot flash Ubuntu (previously created in PC by LiLi USB Creator or UNetbootin: http://unetbootin.github.io/)
4 - Copy file mmc and mmc32 to Desktop
5 - Right cick -> open terminal, then go to the Desktop folder ( by command "cd Desktop" )
6 - Make command execution rights by command "chmod 777 mmc32" and "chmod 777 mmc"
7 - Insert the SD in slot. Terminal command "df" and verify the name card.
Somewhere down everything must occur "mmcblk0" + p + a number.
The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0".
When you do not see anywhere mmcblk0,
you must try different Laptop with on matherboard integrated cardreader.
Now you can read the original CID by command "cat /sys/block/mmcblk0/device/cid"
8 - change CID by terminal command:
"sudo ./mmc32 prog_cid /dev/mmcblk0 744a605344432020103333fcb8012999"
or
"sudo ./mmc prog_cid /dev/mmcblk0 744a605344432020103333fcb8012999"
Writing new CID: 744a605344432020103333fcb8012999
Success! Remove and Reinsert SD card to check new CID.
If you do not see messages about success, remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"
Now will be displaying the new CID 744a605344432020103333fcb8012999
You should see 744a605344432020103333fcb8012999 line.
The last two characters may be different, for example, be 01.
If CID changed besides the last two numbers, so it's okay.
On the last two numbers does not matter,
it's just a checksum, which generates SD card itself.
If the CID unchanged try again command for changing, remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"
If not change, try the same command, but with different bit version of mmc,
remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"
If not change, you must use a different EVO
9 - Locking using passwords
For the RNS315, you must to lock the card by appropriate password.
Double-check that you have the correct folder on the card and all data inside. Nothing else!
It's not possible to unlock easy again !!!
Lock command :
"sudo ./mmc lock_sd /dev/mmcblk0 6FBF2E8BEF698A3C7A74D17986999D61"
or
"sudo ./mmc32 lock_sd /dev/mmcblk0 6FBF2E8BEF698A3C7A74D17986999D61"
Ignores the error messages if they are some, especially this:
"ioctl: Connection timed out - Could not read response to SEND_STATUS from /dev/mmcblk0"
Do not be disappointed - everything is alright!
"ioctl: Connection timed out" - It is a proper report from the system
- when you lock the card, it is immediately invisible to the system
and system report, that can not connect to SD card !
"Could not read response to SEND_STATUS from /dev/mmcblk0"
- also right - system could not read response on query on the status from SD card.
Remove and reinsert SD card to check lock - when system not recognize, so its locked.
Try in a car.
* Comment obtenir le lien de téléchargement ?.
* How do I get the download link?
viewtopic.php?f=222&t=9976* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
viewtopic.php?f=77&t=296
